Screen Door Repair Cost
Published Orlando-metro ranges put a door panel rescreen with kickplate replacement at roughly $90 to $180, and a full door rebuild at $250 to $650. The cage door is the most-used moving part on the enclosure, and the price gap between "rescreen the door" and "rebuild the door" is usually decided by whether the frame is still square.
Door rescreen, rebuild and kickplate pricing
| Scope | Published range | Source |
|---|---|---|
| Door panel rescreen with kickplate replacement | $90 – $180 | A Screen Repair, Orlando |
| Door rebuild / replacement (the door frame itself) | $250 – $650 | A Screen Repair, Orlando |
| Kickplate replacement, per panel | $80 – $160 | A Screen Repair, Orlando |
Read this before you use any number on this page
Every figure here is a third-party published market estimate for the Orlando-metro and Seminole County area, gathered in research — not this business's price list, and not a quote. The sources cited below sometimes disagree with each other by a wide margin, which is why they are listed rather than averaged into one number. Casselberry Rescreening's own rescreening starts at $1.76 per square foot, installed — use that as the real floor against the ranges above.
Source: ascreenrepairinc.com
What decides which number applies
If the door mesh has failed but the frame still hangs square, latches cleanly and rolls smoothly, that is a rescreen — the lower end of the range. If the door has sagged, binds at one corner, or the rollers and track are worn enough that it drags, the frame needs to be re-squared or the hardware replaced before new mesh goes in, which is the rebuild range. See why a screen door won't close or latch for how to tell which one you have.
Door dragging, binding or not latching?
Tell me which one and I can usually say over the phone whether it's a rescreen or a rebuild.